A U-value, also known as thermal transmittance, measures how much heat passes through one square meter of a building element, like a wall, roof, floor, or window, for every degree of temperature difference between the inside and outside. It’s expressed in watts per square meter per kelvin (W/m²K). Simply put, it tells you how quickly heat escapes from your home.

The key takeaway is straightforward: the lower the U-value, the better the insulation and the less heat you lose.

For instance, an old uninsulated solid brick wall typically has a U-value of about 2.0 W/m²K. In contrast, a modern, well-insulated cavity wall built to today’s standards has a U-value around 0.18 W/m²K—meaning it lets through over ten times less heat. This difference directly impacts your energy bills, comfort levels, and carbon footprint.
​
U-values take into account all the ways heat moves through a building: conduction through materials, convection through air gaps and surface layers, and radiation, especially through windows. Every layer in the construction plays a part in the overall U-value.

One of the biggest advantages of timber frame construction is the ability to achieve excellent U-values without excessively thick walls. Modern timber frame systems are designed around high levels of insulation, helping reduce heat loss and improve energy efficiency from day one.

Timber frame homes can comfortably achieve wall U-values of 0.13–0.18 W/m²K, making them well suited to current building regulations and future energy performance standards. Combined with quality windows, doors and roof insulation, a well-designed timber frame home can offer lower running costs, improved comfort and reduced carbon emissions.
​
For homeowners planning a self-build in Cornwall, understanding U-values is an important part of creating a timber frame home that performs efficiently for decades to come.

UK Building Regulations Part L (Approved Document L) set maximum u limits-the worst allowable performance-to control heat loss and improve energy efficiency across the building fabric.

These figures feed into compliance tools such as SAP for domestic buildings and SBEM for non-domestic projects. Meeting them is necessary for building control approval, but they are a baseline, not a target. Better insulated fabric performance will always pay dividends in comfort and running costs.

What counts as a good U-value really depends on the type of building element, your project goals, and budget. For a modern, energy-efficient new home, the construction industry generally aims for these ranges:

• External walls: Between 0.13 and 0.18 W/m²K, whether timber frame or masonry.
• Roofs: Around 0.10 to 0.15 W/m²K, including pitched roofs insulated with rigid boards or multifoil layers.
• Floors: Typically 0.13 to 0.18 W/m²K.
• Windows: Between 0.8 and 1.0 W/m²K, often triple glazed with thermally broken frames.

Looking ahead, the UK’s Future Homes Standard, expected from 2025, will push these targets even lower, for example, roof U-values around 0.11 W/m²K in the notional building.

If you’re upgrading an existing home, realistic targets are a bit higher. For instance, improving a cavity wall from about 1.5 down to 0.30–0.55 W/m²K is a common and cost-effective step. The key is to get your U-value meaningfully below what you started with, balancing heat loss reduction with cost, available space, and moisture considerations.

Lower U-values also help keep the inside surface of walls and roofs warmer, which reduces the chance of condensation and mould, a comfort benefit that’s often overlooked when just comparing prices.

Windows have two important U-values to consider: the Ug value, which measures the thermal performance of just the centre-pane glass, and the whole-window U-value (Uw), which accounts for the entire window assembly including the frame, edge spacers, and seals. Because frame materials typically conduct heat more readily than glass, the whole-window U-value is always higher than the glass-only Ug value.

The proportion of frame to glass also affects the overall U-value. Smaller windows have a larger frame-to-glass ratio, which tends to increase the whole-window U-value.

Typical whole-window U-values vary by glazing type. Single glazing usually ranges from 4.5 to 6.0 W/m²K, modern double glazing typically falls between 1.2 and 1.6 W/m²K, and triple glazing achieves values around 0.8 to 1.0 W/m²K.
​
The choice of frame material significantly influences thermal performance. Timber and uPVC frames generally provide better insulation than standard aluminium frames. However, thermally broken aluminium frames can narrow this difference. When comparing window products, it is important to rely on certified whole-window U-value test data rather than just glass-only figures to ensure accurate assessment of energy efficiency.

Steady-state U-values do not tell the whole story. Thermal mass-linked to a material's density and heat capacity-governs how much heat a structure can store and release over time. A thick masonry wall, for example, can absorb daytime solar gains and release warmth into the evening, smoothing temperature swings and reducing cooling loads in summer.

Related concepts such as decrement delay and decrement factor describe how quickly heat waves pass through a structure. Low thermal conductivity combined with adequate mass can significantly smooth indoor temperatures.

However, on a cold winter morning, high-mass components must be heated up before occupants feel comfortable, which affects heating strategy. Only the first few centimetres of internal material contribute meaningful "useful" thermal mass to occupants.
​
Good design accounts for both the u value and thermal mass, particularly in rooms exposed to strong solar gains or large day-to-night temperature swings.

Understanding U-values is an important part of designing an energy-efficient home. At Cornish Frame Company, we design, manufacture and install timber frame homes throughout Cornwall, helping homeowners create comfortable, high-performance buildings that meet modern energy standards.
If you're planning a self-build home, extension or timber frame project, our team would be happy to discuss your ideas and help you create a building designed for long-term performance and energy efficiency.